Turnkey microbrewery systems mini brewery equipment price WEMAC Y040
About the fermentation tank,ff the budget is sufficient, then the side hole or upper manhole,
mechanical pressure regulating valve, breathing valve, sampling valve, laser welding jacket, hop dry mouth, etc.,
please feel free to match. If the budget is limited, at least the manufacturer needs to add the hop dry spit and sampling valve.
The reliability of the refrigeration system is much greater than that of the boiler,
and the preservation of all craft beer is inseparable from low temperatures.
When the swollen wort enters the fermenter, it needs to be cooled by a plate heat exchanger.
At this time, the intervention of ice water is required to cool the wort.
In the later stage, the wine needs to be stored at a low temperature.
In particular, the beer of the Lager type needs to be low temperature. If the temperature of the beer rises,
the quality of the beer will seriously affect the quality of the beer.
The chiller must choose a large brand that is stable in quality and used.
The size of the ice water tank should be reasonably configured. It is recommended to have 2 refrigerators
and two ice water coils. The two chillers work at the same time, reducing the burden on the chiller,
one has a problem, and the other can operate normally.
Boilers are currently standard products, the quality is relatively stable, it is recommended to use large brands,
and the use of boilers must be equipped with softened water equipment, otherwise the scale in the boiler will be full,
and serious will affect safety.
About the fermentation tank,the thickness of the liner above 500L shall not be less than 3 mm,
the thickness of the ice water jacket shall be 1.5 mm,
and the thickness of the outer envelope shall be 1.5 mm to 2 mm.
I heard some friends say that after 1 year, the fermenter leaked ice water or leaked beer.
In fact, the manufacturer did not use steel plates of sufficient thickness or the welding workers were too poor in level
and the welding oxidation was serious.
WEMAC brewery equipment,good quality,best service.
Welcome your visiting!
If you want to ask anything just fill in the form below and send us.
Name: Andrew time:2019-11-11 09:47:02
good quality, best service! Very nice beer brewing system supplier!
Tank pressure control:
The post-fermentation temperature is generally 12 °C, the hypoglycemic 4.50Bx-3.50Bx is sealed an...>
About the turnkey microbrewery systems,the most important thing is the material and thickness of the board. The temperat...>More >>
Beer brewing requires four raw materials: barley, hops, water and yeast. The quality of these raw materials determines t...>More >>
When cleaning the small lauter tun, it is usually washed with a cleaning ball or a double umbrella plate. Since the clea...>More >>