When cleaning the small lauter tun, it is usually washed with a cleaning ball or a double umbrella plate. Since the cleaning ball or the double umbrella plate is eccentrically placed in the lauter tun, the washing process will have certain influence on the wheat grain. Affecting the filtration speed and the quality of concern, after changing to the annular washing tube, the wheat grains can be uniformly washed, the filtration speed and the quality of the filtered wort can be improved.
The wort entering the fermenter needs to be fermented in the presence of oxygen. In order to promote the full and uniform dissolution of oxygen into the fermenter, our company has added a gas-filled titanium rod to the fermenter to avoid The dissolution caused by direct oxygen supply from the pipeline is insufficient and the oxygen loss is lost. At the same time, in the late stage of fermentation, the fermented mature liquid can be dissolved and washed by carbon dioxide through the inflated titanium rod, thereby improving the quality of the beer.
The electric outlet door spentgrain and the transport system are the auxiliary equipment of the filter tank. When the electric filter door of the filter tank is opened, the wheat grains are discharged into the temporary storage tank of the wheat grain, and then the wheat grain is transported to the appropriate place through the waste system. This reduces the process of manually removing the wheat grains from the filter tank, reduces the manual labor of manually transporting the wheat grains to a suitable place, and reduces the residual water sprinkling during the transportation process of the wheat grains, thereby reducing physical labor and optimizing work. The environment is ideal for the discharge and transport of wheat grains.
Cooked beer: Beer that has been pasteurized or transiently sterilized.
Draft beer: Beer that achieves certain biostability without pasteurization or instantaneous high temperature sterilization.
Al Beer: Beer brewed with beer yeast above. In addition to the characteristics, other requirements should be in accordance with the provisions of the corresponding type of beer.
If you want to ask anything just fill in the form below and send us.
Fermentation process for realizing two-stage heating and three-stage cooling
According to different beer can set differ...>
Tank pressure control:
The post-fermentation temperature is generally 12 °C, the hypoglycemic 4.50Bx-3.50Bx is sealed an...>
About the turnkey microbrewery systems,the most important thing is the material and thickness of the board. The temperat...>More >>
Beer brewing requires four raw materials: barley, hops, water and yeast. The quality of these raw materials determines t...>More >>