Tube and shell heat exchanger WEMAC S019
5.1 The heat exchanger of the distribution system is generally installed in the return water position.
5.2 Through the specific requirements of heating or cooling temperature, the regulating valve or the switching valve controls the pressure of the boiler steam.
6.1 After the heat exchanger is installed, the water pressure test shall be carried out to meet the corresponding operating pressure requirements.
6.2 A flow sensor is installed on the return water to detect the return flow rate.
7.1 All the plate of heat exchangers are manufactured and tested by WEMAC, in the processing center made by CNC and other equipments. At the installation site, all steam lines are insulated.
7.2 It is equipped with boiler steam installation piping, flange connection, and insulation treatment.
The double-tube sheet heat exchanger is mainly used in the working condition with high hygienic grade. Its unique design makes it easy to completely emptying and maintain the clean state inside the heat exchange tube. The double-tube structure avoids the risk of cross-contamination of the conventional heat exchanger.
If you want to ask anything just fill in the form below and send us.
Name: Lance time:2019-12-19 14:31:46
High quality, low price. SO GOOD!
Name: Wright V time:2019-12-13 14:16:49
The Tube heat exchanger has a very good qulity. It is worth buying.
Name: Felicia time:2019-09-28 11:03:42
Very good heat exchangers. The materials are superior and the workmanship is fine.
Name: Mandy time:2019-09-16 11:19:55
This Tube heat exchanger works very well. The design is super！
Tube and shell heat exchanger, also known as tube-and-tube heat exchangers, are wall-mounted heat exchangers that are cl...>More >>
1. High efficiency and energy saving
2. All stainless steel production, long service life, up to 20 years.
3. The laye...>