Pharmaceutical use preparation tank mixing tank for sale WEMAC S011
5.1 Each ingredient solution preparation line corresponds to a preparation tank.
5.2 Control system separate control and linkage control.
5.3 The top of the tank is equipped with an integrated sight glass mirror for easy observation of material agitation.
5.4 The tank is connected to a sanitary grade sterile U-shaped tee with a sterile sampling port.
6.1 The bottom of the preparation tank is equipped with a bottom diaphragm valve.
6.2 The bottom of the preparation tank is equipped with a temperature sensor to monitor the temperature of the tank.
7.1 The preparation tank is installed on site as an all-in-one machine. It is controlled locally and displayed on site.
7.2 Preparation tank is equipped with electrical heating vent filter, online steam sterilization.
Welded tank will perform a hydrostatic test. According to the design pressure requirements, the hydraulic test is generally carried out at a temperature higher than 30% of the design pressure. The pressure holding time is 24 hours normally.
If you want to ask anything just fill in the form below and send us.
Name: Heather time:2019-12-18 14:52:20
The material is very thick. The quality is very good.
Name: Ellis time:2019-10-24 11:30:01
Very nice seller. Very good solution preparation tank.
Name: Alfred time:2019-09-17 09:59:35
This pharmaceutical use preparation tank mixing tank meets my requirements perfectly.
The solution preparation tank is equipped with sanitary liquid level sensor, spray ball, vent filter, load cell and othe...>More >>
The solution preparation tank manufactured by WEMAC is completely in line with CP2015, EP9.0 and USP40, according to var...>More >>