WEMAC Beer making equipment grain material water mixer for beer mash brewing system

When the crushed malt powder is put into the mash tun, the material malt powder is first mixed with the misty water at the water inlet, and then evenly distributed on the small inverted cone. Through the thrust of the water inlet pipe, the first mixed material The inverted cone rotates so that the material and water are evenly mixed, and then flows into the mash tun. The atomized slurry water is pre-adjusted to the feeding water temperature, so that the material-liquid mixing ratio and slurry temperature can meet the process requirements at one time, which can fully reduce the feeding When the malt powder is easy to agglomerate, it reduces the material loss in the production process and improves the uniformity and stability of the mash operation;

The water material mixer can also be made into a visual type. If you use a visual water material mixer, you can observe the material flow at any time during the feeding process, so as to adjust the water and material mixing and blanking conditions in time. It is also available for teaching experiments Use to further increase the intuitive effect.